Junkhouse 3D Bed scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy little custom Junkhouse 3d bed scraper, because why not.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
JunkHouse 3D - Print Bed Scraper
A simple, ergonomic, and reliable print bed scraper designed to cleanly lift 3D prints without damaging your build plate.
Designed with clean geometric lines, a comfortable grip, and built-in branding/hanging loops.
Key Features
Safe for Build Plates: Beveled edge lifts prints cleanly without gouging PEI or glass surfaces. Comfortable Grip: Thick, sturdy handle designed for extra leverage on stubborn prints.
Easy Storage: Built-in hanging hole at the top of the handle.
Zero Supports Needed: Prints flat on the bed with no support material required.
Recommended Print Settings
Material: PLA, PLA+, or PETG (PETG recommended for maximum blade durability).
Layer Height: 0.2mm (or 0.16mm for a smoother edge on the blade).
Infill: 20% - 30% (Gyroid or Grid for good strength).
Walls/Perimeters: 3 to 4 (Extra walls add rigidity to the handle and blade).
Designed by JunkHouse 3D. If you enjoy this print, feel free to drop a like, share your print photos, and check out my profile for more designs!