1 / 1
Plissee Halterung für feststehende Fenster (Ohne Kleben) / Pleated blind bracket fixed window — zdjęcie 1

Plissee Halterung für feststehende Fenster (Ohne Kleben) / Pleated blind bracket fixed window

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ein einfacher Adapter, um Plissees an feststehenden Fensterteilen zu befestigen, ohne kleben oder bohren zu müssen.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Das Problem / The Problem: Bei Doppelfenstern mit einem feststehenden Unterteil lassen sich herkömmliche Klemmträger oft nicht montieren. Meist bleibt nur die unbeliebte Option, die Halterung direkt an das Glas oder den Rahmen zu kleben. With double windows that have a fixed lower section, conventional clamp brackets often cannot be mounted. Usually, the only unpopular option left is to glue the bracket directly to the glass or frame.

Die Lösung / The Solution: Dieser kleine Adapter nutzt den vorhandenen Spalt bzw. die Profilkante des Fensters. Das gedruckte Teil wird einfach eingehakt und bietet eine passgenaue, stabile Aufnahme für den Standard-Spannschuh des Plissees. This small adapter uses the existing gap or the profile edge of the window. The printed part is simply hooked in and offers a perfectly fitting, stable mount for the standard tension shoe of the pleated blind.

⚠ Wichtiger Hinweis / Important Note: Die Datei enthält die Halterung für eine Seite. Für die andere Seite muss das Modell in eurem Slicer (z. B. PrusaSlicer) einfach gespiegelt werden! The file contains the bracket for one side. For the other side, simply mirror the model in your slicer!

Montage / Assembly:

  1. Den gedruckten Adapter in den Spalt zwischen Hauptrahmen und feststehendem Element schieben. / Slide the printed adapter into the gap between the main frame and the fixed element.

  2. Den originalen Plissee-Schuh auf den Adapter aufstecken. / Attach the original pleated blind shoe to the adapter.

  3. Die Schnüre des Plissees wie gewohnt spannen. / Tension the cords of the pleated blind as usual.

Feedback & Änderungen / Modifications: Änderungswünsche können gerne eingepflegt werden! Wenn das Teil für euer Fenster minimal angepasst werden muss, schreibt mir einfach in die Kommentare. Modification requests are welcome! If the part needs to be slightly adjusted for your window, just leave a comment.

  • Material: Prusament PETG

  • Schichthöhe (Layer Height): 0.10 mm

  • Füllung (Infill): 20%

  • Stützstruktur (Supports): Je nachdem, wie das Teil auf dem Druckbett liegt, können Stützen unter den Überhängen nötig sein. Ich empfehle mit Stützen zu drucken.

Tagi