Z-axis Nylon Coupler Membrane replacement - 3DCloner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement 3D Printable membrane for the nylon coupler used on all the axis of the 3D Cloner STG3, so you…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement 3D Printable membrane for the nylon coupler used on all the axis of the 3D Cloner STG3, so you don't need to buy new couplers from them everytime this small plastic piece gets damaged, specially the one in the Z-axis that supports all the weight of the bed assembly. Now you can just replace the broken membrane with a printed one in minutes.
Here's the link if you want to modify it:
https://a360.co/2S0VnWf
Print instructions
Category: 3D Printer Parts Print Settings
Printer: 3DCloner STG3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 100%
Filament: E-Sun PLA Green How I Designed This
measured the original piece center holes, width and thickness, created a sketch in fusion using that reference and extruded it.