UniFi AP Ejection Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to help UniFi APs (like those pesky mini series) come off their mounts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
One of the things I run into often with my job is taking UniFi APs off of their mounts. Naturally, if you don't have the long handled tool that comes with new APs, you are stuck either using all your twisting strength, breaking the ceiling tile, or breaking the mount. This is especially problematic with the Lite/LR series of APs with their plastic mounts. I can confirm that the tool does assist in removing these APs from their mounts.
I printed it in Prusament Galaxy Black PLA, but something stronger/annealed might lower the bend on the plastic. There is space to spare in the hole, so I may revise this design to be wider if suggested. I am also entertaining more thickness, though the design is as thick as the UniFi metal one.