Greenhouse Bubble Wrap Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are clips for attaching Bubble Wrap to the inside of a greenhouse for insulation purposes. The stud fits into…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 555
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
These are clips for attaching Bubble Wrap to the inside of a greenhouse for insulation purposes.
The stud fits into the channelling (a Halls brand in my case) then press the bubble wrap over it and fasten in place with a clip.
The long stud version is for people who want a bigger insulation gap.
I used Andys excellent Shade Support Clips to get the stud shape and designed these with the following in mind:
- As little filament as possible, and faster printing
- No supports needed, if you use the clip as a support for each stud (see picture)
You can also put multiple clips on a single stud which can be handy when layering.
Print Settings
Resolution:
0.16
Infill:
25%
Category: Outdoor & Garden