Adjustable optical Z endstop Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
23 July 2020 Redesigned the body part and added a spring to the design. Now all backlashes are removed by this spring…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
23 July 2020
Redesigned the body part and added a spring to the design. Now all backlashes are removed by this spring
Used spare bed spring I had laying around for some time
New body is labeled "v2"
=========
Adjustable optical Z endstop for Creality Ender 3.
You will need:
- 2 M3 threaded inserts
- 2 M3 screws
- 1 M4 bolt
- 2 M4 nuts
- Nuts and bolts to attach endstop to printer's frame. Use any you like (I used two M4 nuts and bolts)
Attach endstop to moving part using threaded inserts and M3 screws
Put M4 nut at the corresponding cut at the bottom of moving part and screw M4 bolt
Pause print of the wheel (use post processing script in Cura or similar approach in your slicer) and insert M4 nut in it
Category: 3D Printing