4 Years to Mars Board Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert/organizer for the board game, 4 Years to Mars.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An insert/organizer for the board game, 4 Years to Mars. Accommodates sleeved cards (used Gamegenic Standard Card Game Matte 66x91mm 100 microns sleeves; compressing the sleeves somewhat before storage helps them to fit cleanly); supports vertical storage; and has no lid lift. Each .stl should be printed x# of times, per the filenames. See pictures for how to arrange the insert/organizer in the box.
This design was created with Tinkercad to replace the game's minimal cardboard 'insert' and support safe storage of sleeved cards. Uses 244g of filament at 15% Adaptive Cubic infill. This insert is designed for the First Edition of the game with external box dimensions of 212mm X 137mm X 71mm. Remixes permitted.