Raspberry PI camera v2.1 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A newly designed camera case used for the Raspberry PI Camera Module v2.1.
- Ocena
- 4,625 / 5
- Polubienia
- 60
- Pobrania
- 1814
- Wydruki
- 9
- Wyświetlenia
- 12 381
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This newly designed camera case for the Raspberry Pi Camera Module v2.1 features a precise press-fit design. The 3D-printed components snap together cleanly, eliminating the need for glue or screws.
Inspired by the Adjustable/Rotating Mount for Raspberry Pi Camera V2
Print instructions
0.15 layer height
20% infill
Use supports for camera back and camera angle files
PLA Recommended, other materials should also work
General Notes
You need to add supports for plate only to print camera-back.stl and camera-angle.stl for the smaller parts a brim of at least 4mm is recommended.
Assembly Instructions
To screw the optional arm parts together you will need:
3 M3 x 10 Hex Socket Screws
2 M3 normal nuts
1 M3nS square nut
You may also need some Super Glue in order to hold the camera front and back together if the press fit does not suffice
If you print it, feel free to post a make — I’d love to see your setup!