Small(er) PTFE Tube Y Splitter - Festo M5 Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny filament PTFE tubing splitter that uses Festo M5 pneumatic fittings.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Does the world need another filament tubing splitter/union? Probably not.
Did I need another filament tubing union? Yeah.
I could never really get Deimosfr's CoreBoxx splitter design to work; for me the curved filament path always had too much internal friction w/r filament movement and the threaded ends didn't really work with the fittings I had. There aren't many splitter designs out there that I thought would work with the angle the CoreBoxx MMU enclosure puts the selector outlet tubing at in combination with the default side-reel tube routing.
I previously made a design (not posted anywhere) that attached to the metal anti-sag arm I'm using, but it occasionally would contact enclosure sides, resulting in layer shifts. Other splitter designs I found would've required complex tubing routing and/or bend radii that I wasn't too comfortable with.
This design is what I came up with most recently for CoreBoxx use which seems to be working well for now. It borrows Julio's splitter design, but uses smaller Festo M5 fittings. Because of this, I was also able to reduce the length of the internal filament paths & the overall size of the design.
I printed this using an 0.25mm nozzle primarily to improve the quality of the M5 threadforms. No idea if it'll work as well with an 0.4mm, but it might if your fittings can self-tap through any irregularities. I used 0.07mm layers for the same reason as the nozzle size.
The print in the photos was made using PETG. Seems to work well enough that I didn't bother "upgrading" to ASA or PA. Don't use a filament that has rough inclusions like CF or GF though, but if you're reading this far you probably already knew that.
You may want to print this with the outlet facing down with a small brim for stability since it'll be top-heavy. Painting internal support just on the fitting seat on the outlet end may be worth it too since its intentionally not tapered. Supports will probably improve the odds that face stays flat. Just make sure to paint anti-support on the nearby threads so the slicer doesn't mangle the threadform with support connections.
Unlike other pneumatic fittings, the Festo fittings seem to lock the tube's rotation in the socket once inserted. Keep that in mind if your application induces a twisting force along the tubing axis; you may want to use a different M5 fitting that permits twisting motions or a different splitter design in that case.
