1 / 3
Pneumatic Tube System Carrier Prop for Healthcare Simulation — zdjęcie 1
1 / 3

Pneumatic Tube System Carrier Prop for Healthcare Simulation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printable pneumatic tube capsule with screwable lid for ''transporting'' samples and results in healthcare simulation

Ocena
0 / 5
Polubienia
5
Pobrania
13
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! 😊
https://buymeacoffee.com/aleksandrs

In many hospitals, pneumatic tube systems are used to quickly transport blood samples, medications, documents, and other small items between departments.

So here is a simple pneumatic tube system capsule / carrier prop for healthcare simulation.

The capsule has a screwable lid, allowing participants to actually place items inside it during a simulation.

For example, you can use it to:

  • ''send'' simulated blood samples from an Emergency Department, ward, ICU, or operating room to the laboratory;

  • ''receive'' printed laboratory results or other information during a scenario;

  • ''transport'' simulated blood tubes, request forms, medication labels, or small props;

  • add an extra step to scenarios involving specimen collection, identification, labeling, and transport;

  • reproduce hospital workflows even when your simulation centre does not have access to a real pneumatic tube system.

I especially like the possibility of using it as a small communication tool between the simulation room and the control room: participants can “send” their bloodwork, and instructors can later return the capsule with laboratory results inside.

Important safety notice

This is not real medical equipment and is not intended for clinical use.

It is a simulation prop designed exclusively for healthcare education, training, demonstration, and recreational 3D printing.

DO NOT PUT IT IN REAL PNEUMATIC TUBE SYSTEM !!! :) 

If you use this model in your simulation centre, course, or workshop, please send me a message or photo. I really enjoy seeing where my models end up and how other educators integrate them into their simulations!

Tagi