Apple TV 4K 3rd Gen Multi-Mount Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4-in-1 Apple TV 4K mount for wall, VESA, TV vent hooks or adhesive installation. Prints support-free.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Apple TV 4K 3rd Gen Multi-Mount Holder
A compact, support-free 3D printable holder designed for the Apple TV 4K 3rd Generation (2022), models A2737 and A2843.
I designed this mount to provide several installation options in one model, so the same printed part can be used in different home theater setups.
FEATURES
• 4 mounting options in one design:
– Wall mount
– VESA mount
– TV vent hooks
– Adhesive mounting
• Compatible with Apple TV 4K 3rd Generation (2022)
• Designed for models A2737 and A2843
• Multiple VESA mounting positions
• Open bottom for easy HDMI and power cable access
• Ventilated back design
• Compact, low-profile design
• Designed to print without supports
• One-piece print — no assembly required
PRINTING
Recommended orientation:
Print upright on the bottom surface, as shown in the printing photo.
Recommended settings:
• Layer height: 0.20 mm
• Walls/perimeters: 3 or more
• Infill: 15–25%
• Supports: None
• Material: PLA or PETG
The model was specifically designed for this printing orientation and does not require supports.
INSTALLATION OPTIONS
Wall:
Use suitable screws and anchors for your wall material.
VESA:
The rear mounting pattern provides multiple mounting positions for different TV/VESA configurations. Use appropriate TV/VESA hardware for your installation.
TV vent hooks:
The upper mounting points can be used with suitable hooks to hang the holder from compatible TV ventilation openings.
Adhesive:
The holder can also be mounted to a suitable clean, flat surface using appropriate mounting strips.
IMPORTANT
This Printables download contains the 3D printable mount only.
Apple TV, screws, anchors, hooks, adhesive strips, VESA hardware, HDMI cable, power cable and other hardware shown in photos are not included.
Always use mounting hardware appropriate for your TV, wall, surface and installation method.
This model is for personal use under the included license.
Designed and tested by Yutaka3DLab.
More designs and product information:
Apple TV is a trademark of Apple Inc. Yutaka3DLab is not affiliated with, endorsed by, or sponsored by Apple Inc.