1 / 4
Oropharyngeal Airway Prop for Healthcare Simulation — zdjęcie 1
1 / 4

Oropharyngeal Airway Prop for Healthcare Simulation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Oropharyngeal Airway (OPA) No. 4 (100 mm, Red) Prop for airway management training and healthcare simulation.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is not real medical equipment and must never be inserted into a real patient !

It is a rigid 3D-printed simulation prop intended exclusively for healthcare education, demonstration, and training.


If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! 😊
https://buymeacoffee.com/aleksandrs

Here is a 3D-printable oropharyngeal airway (OPA) prop, size No. 4 / 100 mm, traditionally color-coded red.

When printing, orient the model so that supports are not generated inside the airway tube, as they can be difficult to remove. For example, you can print the model on its side, as shown in the last photo.

This model is designed for healthcare simulation, airway management teaching, equipment familiarisation, and low-cost training setups where using real disposable airway equipment is unnecessary or inconvenient.

It can be useful for:

  • basic and advanced airway management training;

  • BLS and ALS scenarios;

  • emergency medicine and anaesthesia simulation;

  • bag-mask ventilation practice;

  • airway equipment identification and sizing exercises;

  • resuscitation trolley or airway bag familiarisation;

  • tabletop and equipment-based simulations.

The model can also be used when learners need to select an appropriate airway adjunct as part of a scenario without consuming real clinical equipment.

For additional realism, print it in red to match the commonly used colour coding for a 100 mm / No. 4 oropharyngeal airway.

Important safety notice

This is not real medical equipment and must never be inserted into a real patient.

It is a rigid 3D-printed simulation prop intended exclusively for healthcare education, demonstration, and training.

If you use this model in your simulation centre, course, or workshop, please send me a message or photo. I really enjoy seeing how my models are being used in medical education!

Tagi