Craftsman 1/4 Drive Socket Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a 1/4 drive Craftmans Socket orgainer with a slot for each socket
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a bunch of socket set holders for 1/2, 3/8, and 1/4. These sets are based on the Craftsman sockets.
Sizes Included in 1/4 Drive Set:
Metric- 4mm-14mm and 5.5mm
Metric Deep- 4mm-14mm and 5.5mm
Standard- 5/32, 3/16, 7/32, 9/32, 5/16, 11/32, 3/8, 7/16, ½, 9/16
Standard 12 point- 3/16, 7/32, ¼, 9/32, 5/16, 11/32, 3/8, 7/16, ½, 9/16
Standard Deep- 3/16, 7/32, ¼, 9/32, 5/16, 11/32, 3/8, 7/16, ½, 9/16
¼ Latches are the same size regardless of metric or standard
I personally used three different colors to distinguish ½, 3/8, and ¼, and used color-coded latches to distinguish between Metric and Standard Socket sets. I also added a different latch for 12-point sockets to further contrast with the normal 6-point sockets. The boxes only need two latches per box, so don't print all four that are included in the 3MF files (unless needed). I recommend 5-10% infill and no supports for the best results. I used some brass stock for the hinges (2.4mm rods). A 2.4-2.6mm screw or rod should work too. I used a fine-point Sharpie for the black lettering, but if you have a printer with multicolor printing, you can use that.
Sizes Of Boxes:
Metric and Standard boxes are the same size.
Deep- 115mm by 52mm by 61.7mm
Regular- 115mm by 52mm by 33mm
Without Top And No Sockets :
Deep- 115mm by 52mm by 29.35mm
Regular- 115mm by 52mm by 15mm
1/2 Socket Holders Link
3/8 Socket Holders Link
Profile Link
https://www.printables.com/@SBarler_5282717
If you have any questions or comments, please let me know!