1 / 6
Sovolt300/t500 bambulab hotend and 4010fan adapter — zdjęcie 1
1 / 6

Sovolt300/t500 bambulab hotend and 4010fan adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

adapter for bambu hotend

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A modificacion of a model to adapt the bambulab hotend to the sovol t300 that improves a lot the filament flow consistency and help with the annoying jams. important that the model isnt compatible with the extruder case yet, in a few weks i will upload a model that is, but i run out of filament.

Another important thing is that i design the leveling sensor holes to fit without heat inserts because they doesnt need much force, and you need a m3 or m2 washer for the below sensor hole.

I put a creality 4010 fan but i recomend to put a noctua fan instead, but both had a lot of sound improve, and i recomend to decrease a 15-25 grades on the slicer because it had a better thermal design.