3M Command Reinforced Hook Medium Uitility
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced hooks to replace broken ones.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Frustrated with a broken hook and an expensive replacement, I was glad to find jhfield creation of the Medium Utility Command Hook (3M 17001). He was kind enough to upload the STEP file that allows me to make this remix.
A thicker, reinforced hook that has an angle optimised for printing and is as upright as possible for more practical usage.
2 version available. A stubby one and another 10mm longer hook.
Printed with PC-CF and 10 wall count. I doubt it will break anymore.
To print flat as per photo. Only Grid on bed support required for the underside. The hook can be printed without any support as shown in the photos.
Wall loops: 10
Top shell layers: 5
Bottom shell layers: 5
Sparse infill density: 40%
Sparse infill pattern: Gyroid
Support: Normal Grid
Top Z distance: 0.2mm
Support wall loops: 2
Top interface layers: 4
Total Filament: 12.74g
Support
If you like this, consider buying me a cup of coffee. Thank you!