Wall mount for Sensereo MSC-1 Smoke/CO detector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the base of the detector so that it can be screwed into a standard electrical wall box
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mount that comes with the MSC-1 is designed for two anchors into drywall. My existing smoke detectors are mounted over standard wall electrical boxes. If I used the provided mount, it wouldn't cover the existing hole in the wall (to say nothing of the paint ring around the old detector).
This model adapts the base of the detector so that it can be screwed into an electrical box. This also makes it easier to mount the detector level, which is tricky with the provided mounts. Be sure to enable supports so that the overhanging clips print correctly.
