Heavy Duty Mountable 18650 Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After trying to print several 18650 battery holders available, I decided to make one of my own using Autodesk 123D…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 150
- Wydruki
- 2
- Wyświetlenia
- 581
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After trying to print several 18650 battery holders available, I decided to make one of my own using Autodesk 123D Design that would better suit my needs.
This holder is Heavy Duty when printed at 100% infill, as well as mountable. The terminal connections can be made from machine screws and hex nuts (I used 3mm) and wingnut.
There is enough vertical "wiggle room" to tightly lock down the cell with the screws, but the cell snaps firmly into place within the holder for a nice snug fit.
If you would like to help promote me, please visit my teespring store https://teespring.com/stores/mitzpatrick-fitzsimmons
Category: Parts