Sparkxi7 (Poop)Purge Calibration - Optimize Flushing Volumes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduce your printer poop!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reduce printer poop/purge on the Sparkx i7 !!
Use this preconfigured 3mf file to calibrate the flush needed for color changes on your sparkx i7.
On the calibration print, find the value that you are satisfied with and use it in the Flushing Volumes settings for your next prints.
Note!: You need to print one for each colour change: for example Black and White FIlament:
Black > White but also White > Black.
Don't forget! More colours means more calibrations.
You can add more on the same plate if wished.
All the settings are correctly configured in the .3mf file, but if you prefer to slice in CrealityPrint by yourself follow these instructions:
-Next to Filament: Click on 2nd icon: Flushing Volumes:
Set all values to 0 and Multiplier to 0.1
-Under Multifillament:
Please ensure the Prime Tower is disabled
-Under Strength: Scroll down to: Advanced:
Sparse Infill direction is set to 0
Solid Infill direction is set to 0