Collapsible Pointer (for Teachers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A classroom-friendly magnetic collapsible pointer with Vase-mode inner tubes. Ultra-light, replaceable, sticks to whiteb
- Ocena
- 0 / 5
- Polubienia
- 215
- Pobrania
- 436
- Wydruki
- 0
- Wyświetlenia
- 4609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
⚠ IMPORTANT WARNING:
The inner extending tubes MUST be printed individually in Spiral Vase Mode (Spiralize Outer Contour) with 0 bottom layers!
If you print them in standard mode (normal walls), the segments will become too thick, will not fit together, and will NOT slide or collapse.
🎓 Collapsible Pointer for Teachers (Vase Mode Assembly)
A sleek, ultra-lightweight, and classroom-friendly telescopic pointer designed specifically for educators!
While popular "collapsing swords" and one-piece print-in-place toys are fun, they are often too bulky, heavy, and aggressive for real teaching environments. This pointer is re-engineered with a practical, modular approach.
---
💡 Why Modular Vase Mode Assembly instead of Print-in-Place?
Print-in-place models are convenient, but they often suffer from fused seams and stringing issues.
1. Flawless Seam & Smooth Action:
Printing the inner tubes individually in Spiral Vase Mode eliminates Z-seam bumps completely, allowing each section to slide smoothly without catching.
2. Easy Repair & Longevity:
Thanks to the screw-on bottom cap, you can simply replace a single damaged segment in minutes rather than reprinting the entire assembly.
---
🕊 The Ultimate Classroom Safety Feature (A Feature, Not a Flaw!)
Because the inner tubes are printed in single-wall Vase mode, they are intentionally delicate.
👉 Even in the rare event that a teacher completely loses their temper during a tough class, rest assured—there will be zero physical casualties.
The pointer will instantly crumple into harmless plastic before doing any harm! It is purely, 100% designed for peaceful pointing at the board.
---
✨ Key Features
- Classroom-Friendly Design: Sleek wand-like aesthetic with an anti-slip diamond pattern grip.
- Magnetic Whiteboard Mount: Uses standard 6x2mm neodymium magnets (the same size widely used in Gridfinity!). Sticks firmly to whiteboards and chalkboard frames.
- Featherlight: Single-wall inner tubes mean virtually zero wrist fatigue during long lectures.
- Modular Screw Cap: Easy assembly and quick segment replacement.
---
🖨 Recommended Print Settings
- Handle & Bottom Cap & top point:
- Standard mode, Layer height: 0.2mm, Infill: 15%, Supports: None.
- Inner Telescopic Tubes:
- Spiral Vase Mode (Spiralize Outer Contour): Enabled
- Extrusion Width: 0.45mm
- Bottom&Top Layers: 0 (Open bottom)
- Material: PLA or PETG
---