Omnifix Pinecil Case/Plus Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Merged the original omnifix pinecil case & the plus remix with a few modifcations.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was originally tossing up between the original Omnifix Pinecil case & the Plus remix and in the end, I went with the original. After printing & attempting to use I found myself in the same position that people in the comments did - the magnets for the helping hands would jump out of their respective spots. I decided to have a go at remixing the original & taking ideas from the plus remix, added my own modifications & I'm pretty happy with the results. The helping hand magnets are now retained & replaced the other magnets to hold the lid on.
Printer settings that I used:
0.4mm nozzle
15% infill
0.2mm layer height