Ultimate-Guard 3 ring binder page-lock. 2, 3 and 4mm variants.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents pages from sliding up against the rings, and possibly damaging cards when stored. 2mm, 3mm and 4mm variants.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this binder spacer to hold back binder pages from sliding up against the rings, creating indentation to binder pages, as well as cards themselves. If adjusting holes accordingly, it can also act as a brake to hold fewer pages from sliding down as well.
I included 3 sizes of each, as well as a blank solid for those who wants to remix it with custom "holes" that saves plastic.
2mm is what i've tested as thinnest, and it will bend quite a bit when you have heavy pages on top of it when binder is open, but when put back in storage, it will slowly bend back to flat.
If you want a custom one for your binder, comment with a link to your binder, and if you have calipers/verniers, measure thickness of the rings, and distance between 2 rings (caliper "bite" on top of the first ring, and against bottom of the ring below), and i'll make a variant for your binder to add to the binder supported list.
If you’d like to support what I do, you can buy me a coffee :)
https://ko-fi.com/duckers