PLAYMOBIL Steck Castle Window Bars / Grille 3002868 (30028680) - 3666 Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printable replacement for PLAYMOBIL part 3002868 / 30028680
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printable replacement for PLAYMOBIL part 3002868 / 30028680, the arched window bars / grille used in the classic PLAYMOBIL Steck castle construction system.
The original part can be found in vintage medieval sets such as PLAYMOBIL 3666 and other classic castle and medieval sets that use the same window system.
I tried to reproduce the original part as closely as possible, including the rounded outer frame, horizontal bar layout, distinctive four-circle pattern in the center, and the mounting features around the outside of the grille.
The model is intended as a replacement for missing or damaged original window bars while maintaining the appearance of the classic PLAYMOBIL castle windows.
RECOMMENDED 3MF FILE
I recommend using the supplied 3MF file rather than simply importing the model and applying a standard slicer preset.
The supplied project already contains the intended orientation and a print setup optimized specifically for this part, including support clearances designed to make the small mounting features easier to print and clean up.
Using the supplied 3MF also avoids having to recreate the support and adhesion configuration manually.
The exact printing parameters are provided separately in the Settings and manufacturing instructions below.
3D printing settings
RECOMMENDED PRINT SETUP
The supplied 3MF is optimized for:
Printer: Bambu Lab A1
Nozzle: 0.4 mm
Layer height: 0.08 mm
Initial layer height: 0.20 mm
Material: PETG
Wall generator: Arachne
Walls: 3
Infill: 12%
Infill pattern: Gyroid
Top layers: 9
Bottom layers: 7
Scale: 100%
The model should be kept in the orientation supplied in the 3MF.
The project is primarily tuned around PETG, particularly the support clearances. A PLA filament profile is also stored in the project, but the supplied process itself should be considered the PETG-optimized configuration.
PETG PROFILE
The primary saved filament profile is:
DELUXE Creality CR-PETG Clean Strong - A1 0.4
Saved starting temperatures:
First-layer nozzle: 255°C
Nozzle after first layer: 250°C
Textured PEI bed: 80°C
First-layer bed: 80°C
These values can be adjusted if required for a different brand of PETG.
SUPPORTS
The supplied project keeps automatic supports enabled for the small mounting and overhanging features.
Support configuration:
Supports: Enabled
Type: Normal (Auto)
Style: Snug
Threshold angle: 30°
Top Z distance: 0.24 mm
Bottom Z distance: 0.24 mm
XY distance: 0.50 mm
Top interface layers: 2
Bottom interface layers: 0
Interface spacing: 0.35 mm
Base-pattern spacing: 3.0 mm
Build-plate-only: Off
Remove small overhangs: Off
The relatively generous 0.24 mm Z clearance and 0.50 mm XY clearance are intentional for PETG and help prevent the supports from bonding too strongly to the small functional features.
I recommend keeping the supplied support configuration rather than replacing it with the default PETG support settings.
BUILD-PLATE ADHESION
The active project settings use:
Brim type: Outer-only
Brim width: 10 mm
Brim gap: 0 mm
The zero-gap brim provides strong adhesion and helps keep the long, narrow sections of the grille stable during printing.
Remove the brim carefully after printing, particularly around the small mounting features.
PRINT SPEEDS
The supplied project uses:
Outer wall: 60 mm/s
Inner wall: 120 mm/s
Sparse infill: 150 mm/s
Internal solid infill: 150 mm/s
Top surface: 150 mm/s
First layer: 50 mm/s
Acceleration:
Outer wall: 2000 mm/s²
General acceleration: 4000 mm/s²
Initial layer: 500 mm/s²
WHY USE THE SUPPLIED 3MF?
The supplied project already combines the intended:
Model orientation
0.08 mm layer height
Arachne wall generation
12% Gyroid infill
PETG-specific support clearances
Snug automatic supports
Strong zero-gap brim
Material configuration
Importing the model into a new project and applying a generic preset will not necessarily reproduce the same support behaviour.
For the easiest and most reliable print, use the supplied 3MF as the starting point.