MikroTik CSS610-8G-2S+IN Wall Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight wall mount for MikroTik CSS610-8G-2S+IN. Two L-brackets, 60% less filament, vents, cable cutout.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount bracket for the MikroTik CSS610-8G-2S+IN switch. Drop-in cradle design with front and side lips that hold the switch securely. Reinforcing ribs on the outside of the wall keep the switch sitting flush against the back.
Key Features
- Drop-in cradle: front lip + side lips create a perfect-fit tray for the switch
- Switch sits flush against the back wall (no interior gussets to get in the way)
- 6 round M5 screw holes through vertical wall (3 across, 2 heights)
- 5 external ribs on back of wall for structural rigidity
- 20 round holes in symmetric grid for weight reduction
- 7 vent louvers in wall for airflow
- Cable cutout for power and SFP+ cables
- 2 zip tie slots for positive retention
- Countersunk screws for flush mounting
- No supports needed, prints flat on bed
Print Settings
Material: PETG or PLA+
Layer Height: 0.20mm
Infill: 30% gyroid
Walls: 4 perimeters
Supports: None
Print time: ~85 min per bracket
Filament: ~79g per bracket
Installation
1. Print both brackets
2. Screw brackets to wall with 6x M5x30mm screws per bracket
3. Space brackets 200mm apart
4. Drop switch into the cradle from the top
5. Optional: zip tie switch to brackets through the retention slots
Compatibility: MikroTik CSS610-8G-2S+IN (200 x 164 x 44mm, 1.1kg). The FreeCAD source is parametric and can be adjusted for similar-size switches.
BracketForge - functional 3D-printable mounts for IT and homelab equipment.