1/4 inch Centering Dowel Drill Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a self-centering 1/4" dowel drilling jig I designed up for a specific project. Works really well for boards 1"…
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 230
- Wydruki
- 2
- Wyświetlenia
- 1370
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a self-centering 1/4" dowel drilling jig I designed up for a specific project. Works really well for boards 1" thick or less. Uses a 1/4" ID x 3/8" OD x 1/2" long metal spacer for guiding the drill bit. It's a tight press fit, depending on your printer's tolerances.
This is the spacer I used: https://www.lowes.com/pd/Hillman-5-Count-0-250-in-x-3-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012470
Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
20%
Filament: MH Build PLA Glow-In-The-Dark Blue
Notes:
To make sure that it holds up to the press fit, I would suggest printing with 4-5 perimeters.
Category: Hand Tools