1 / 2
Inland Cardboard Spool Adapter for Filament Storage 2026 — zdjęcie 1
1 / 2

Inland Cardboard Spool Adapter for Filament Storage 2026

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for Inland cardboard spools to fit the rewinder used in the Filament Storage 2026 system.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

Dimensions used:

  • Spool Hole Diameter: 53.5

  • Spool Width: 64.8

Key:

  • CB = Cardboard

  • PC = Plastic Closed Center Hub

  • PO = Plastic Open Center Hub

  • RS = Reusable Spool

  • 3D = 3D Printed Spool

Print settings:

  • .20mm Structural

  • Infill: Gyroid

  • Supports: None

Source:

  • Measurements were taken using a digital caliper.

  • Hole diameter was measured using the inside jaws.

  • Spool width was measured by placing the spool on the flat surface and using the depth gauge.

  • In both cases, multiple measurements were taken and averaged.

Photos:

  • Adapter in spool to make sure it fits

  • Spool in assembled test lid to make sure it spins freely