Drehgelenke Blechtür / Hinged Joints for Sheet Metal Doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Halterungen von einer Werkstatt-Blechtür. Brackets from a workshop sheet-metal door.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Ich habe sie aus PETG gedruckt, ist aber auch problemlos aus PLA möglich. Füllgrad ca. 50-60 Prozent sollte ausreichend stabil sein, 3 Wände.
Einfach zu drucken ohne Stützgeometrie oder Brim. Falls der Zapfen zu früh bricht, sollte man den Teil etwas drehen bzw. die Achse horizontal ausrichten.
I printed it using PETG, but it can also be printed with PLA without any problems. A fill rate of about 50–60 percent should provide sufficient strength, with 3 walls.
Easy to print without support structures or a brim. If the pin breaks too early, you should rotate the part slightly or align the axis horizontally.