Doweling Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1/4" doweling jig that I created to help me through a project build. It was designed to work on 3/4" plywood…
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1/4" doweling jig that I created to help me through a project build. It was designed to work on 3/4" plywood or MDF, but I'm sure you can easily change that. I looked into commercially made jigs but they were all too expensive. So I decided to print my own!
You will need the following from the big box store, or off the interwebs (your choice):
2 - #6 x 1" machine screws
2 - #6 hex nuts
1 - 3/8" OD x 1/4" ID x 1/2" long metal spacer/bushing (steel or bronze should work)
I printed mine with the sides that would be facing the inside of the jig on the bed as to have them as flat as possible. The spacer should be a nice, tight press fit, but if it's loose, super glue should help do the trick. Once assembled, use a your 1/4" drill bit to finish drilling the hole in the dill plate. Then use a knife or the like to clean up the tear out. Done.
Hope you guys find this useful. It worked great for me and saved me about $60! Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Infill:
50% - !00%
Notes:
Make sure to print with at least 5 layers as to help give it more rigidity.
Category: Hand Tools