Another Waveshare 2.9" ePaper Frame | Raspberry Pi Pico (2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An open-frame mount for the Waveshare 2.9" ePaper display, with a built-in Pico mount and indicator LED slot.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Another open frame designed to house a Waveshare 2.9-inch e-Paper display module together with a Raspberry Pi Pico (2) and an indicator LED. Ideal for home automation projects like a trash collection reminder.
Bill of Materials
Waveshare 2.9 inch ePaper display module
Raspberry Pi Pico / Pico 2
RGB indicator led (preferably SMD)
Print Settings
Material: PLA or PETG recommended
Layer height: 0.2 m
Supports: Required
Infill: 20–30%
Assembly
Seat the e-Paper module into the upper recess and secure with screws
Mount the Pico in the side compartment
Route the ribbon cable through the cutout
Install the indicator LED on the back side
Wiring diagrams and pin assignments depend on your specific firmware and project setup.
Note: This is an evolution of by previous design: