Triforce LED light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triforce LED light that is easy to print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made using https://github.com/ksjh/LEDneon -- highly recommended tool, works great.
Instructions:
Print all parts. I recommend printing the small triangle part using a different color so it will stand out, and printing the "face" part using a transparent filament.
Glue the LED strip onto the inner wall of the model. I've started near one of the two holes on the bottom and went around the outer wall, then glued it into the inner smaller triangle. The other hole on top of the shape is intended to allow for hanging of the finished object eg. on he wall using the hook. There are holes between triangles to put the strip through.
Push the smaller triangle into the hole inside of the shape, with the "full" triangle being the top (the small cuts on the corners are there to prevent damage to the LED strip). It's quite a tight fit. Do not push it to the end, it should leave some space in the back, especially considering that the led strips are exposed in the back.
Put the face plates on top of the triangles. They should lie there comfortably. To keep them in place a little drop of the glue can be applied.
By constructing the LED installation you agree that you know what you're doing and that you do it on your own risk. If you don't feel comfortable with it, then you may consider putting those ready-made battery operated small light strands. Also, the print looks nice even without the light inside in my opinion.