1 / 3
Twitter Gravel V3 – 30 mm Headset / Stem Spacer — zdjęcie 1
1 / 3

Twitter Gravel V3 – 30 mm Headset / Stem Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom 30 mm headset / stem spacer designed for the Twitter Gravel V3 gravel bike.

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Description

Custom 30 mm headset / stem spacer designed for the Twitter Gravel V3 gravel bike.

This spacer follows the shape of the original headset area and is intended to provide a cleaner, more integrated appearance than using a stack of standard round spacers.

The model was designed specifically around the geometry of the Twitter Gravel V3 headset/stem interface.

Dimensions

  • Height: 30 mm

  • Designed for: Twitter Gravel V3

  • Type: integrated / aerodynamic headset spacer

  • Installation position: between the headset cover and stem

The model includes the original-style external profile and internal cutouts required for the headset area.

Printing Recommendations

Recommended print orientation: upright, in the same orientation as installed on the bicycle, with the large flat bottom surface on the build plate.

Recommended settings:

  • Layer height: 0.16–0.20 mm

  • Nozzle: 0.4 mm

  • Perimeters / walls: 5–6

  • Top/bottom layers: 6 or more

  • Infill: 50–100%

  • Supports: normally not required

  • Brim: optional, depending on material and bed adhesion

For a functional part I recommend using PETG, ASA, ABS, PA or a fiber-reinforced engineering filament.

PLA is not recommended for long-term outdoor use, especially in hot weather or when the bicycle is left in direct sunlight, because it may soften or creep under constant compression.

For maximum rigidity I recommend at least 6 walls and 70–100% infill.

Installation

Before final installation, check that:

  • the spacer sits completely flat on the headset cover;

  • the stem sits completely flat on the spacer;

  • there is no interference with cables or brake hoses;

  • the headset can be correctly preloaded;

  • the steerer tube has sufficient engagement inside the stem;

  • there is no play in the headset after tightening.

Tighten the stem and headset according to the bicycle/component manufacturer's torque specifications.

Compatibility

Designed for:

Twitter Gravel V3

Compatibility with other Twitter frames, model years or headset/stem configurations has not been verified.

Even small differences in headset covers, cable routing or frame revisions may affect fit.

If you successfully use this spacer on another version of the Twitter Gravel, please leave a comment with the exact bike version.

Important Safety Note

This is a user-designed 3D printed bicycle component.

A headset/stem spacer is located in a safety-critical area of the bicycle. Inspect the printed part carefully before installation and periodically check it for cracks, deformation or compression.

Use an appropriate engineering filament and good print settings.

Use the model at your own risk.

About the Model

I designed this spacer because I wanted a single 30 mm integrated spacer for the Twitter Gravel V3 instead of stacking several standard spacers.

The goal was to keep the front of the bike visually clean and preserve the shape of the original headset area.

If you print it, I would be happy to see your Makes and hear whether the fit works correctly on your bike.

Weight Saving

Compared with the original aluminum spacer, this 3D-printed 30 mm version is approximately 25 g lighter, helping reduce weight without changing the overall appearance of the cockpit.

Tags

Twitter Gravel V3, Twitter bike, gravel bike, headset spacer, stem spacer, bicycle spacer, 30mm spacer, aero spacer, integrated headset, bike parts, cycling, gravel, 3D printed bike parts

Tagi