1 / 6
Twitter Gravel V3 – Aero Seatpost Tool Box Mount — zdjęcie 1
1 / 6

Twitter Gravel V3 – Aero Seatpost Tool Box Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom aerodynamic tool box mount for the Twitter Gravel V3 seatpost.

Ocena
0 / 5
Polubienia
10
Pobrania
12
Wydruki
0
Wyświetlenia
194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Description

Custom aerodynamic tool box mount for the Twitter Gravel V3 seatpost.

I designed this adapter specifically for the aerodynamic seatpost used on the Twitter Gravel V3.

The mount allows you to install the excellent “Seatpost Mount Bike Storage Tool Box” by YamadaTaro behind the seatpost, creating a clean and aerodynamic storage solution for tools, CO₂ cartridges, tire repair equipment and other small cycling essentials.

This upload is primarily intended as a Twitter Gravel V3 specific seatpost mount / adapter.

Compatible Storage Box

The mount was designed to work with:

“Seatpost Mount Bike Storage Tool Box” by YamadaTaro

The original storage box uses a GoPro-style mounting interface, which makes it possible to create bike-specific seatpost adapters while keeping the same storage box.

Please download the storage box itself from the original author's Printables model.

Why I Made It

The Twitter Gravel V3 uses an aerodynamic seatpost, so standard round seatpost clamps and universal mounts do not fit properly.

I wanted the storage box to:

  • sit close to the seatpost;

  • follow the aerodynamic shape of the bike;

  • remain centered behind the seatpost;

  • look integrated rather than attached with a universal clamp;

  • provide a rigid mounting point for the aerodynamic tool box.

The result is a dedicated mount shaped specifically for the Twitter Gravel V3 aero seatpost.

Printing Recommendations

For this part I recommend using a strong and temperature-resistant material.

Suitable materials:

  • PETG

  • ABS

  • PET-CF

  • other fiber-reinforced engineering filaments

Suggested Settings

  • Nozzle: 0.4 mm

  • Layer height: 0.16–0.20 mm

  • Walls / perimeters: 5–6

  • Infill: 100%

  • Top/bottom layers: 6+

Use enough walls around the mounting interface because this area receives most of the mechanical load.

PLA is not recommended for permanent outdoor use because the mount can be exposed to direct sunlight, high temperatures, vibration and continuous mechanical load.

Installation

Make sure the mount sits correctly against the seatpost before tightening.

Do not overtighten the mount against a carbon seatpost.

After installation:

  • check that the box is securely attached;

  • make sure there is no movement between the mount and seatpost;

  • check tire clearance with the suspension/flex of the bike and under rider load;

  • make sure the box cannot contact the rear wheel;

  • periodically inspect the printed part for cracks or deformation.

This is especially important after the first few rides.

Compatibility

Designed and tested for:

Twitter Gravel V3

The geometry is based on the aerodynamic seatpost profile of this bike.

Compatibility with other Twitter Gravel models or other seatposts has not been tested.

If your bike uses a different seatpost profile, the mount may not fit correctly.

Credits

The aerodynamic storage box itself was designed by YamadaTaro.

Original model:

Seatpost Mount Bike Storage Tool Box

This model is my custom Twitter Gravel V3 seatpost mounting solution created to use that storage box on this bicycle.

Huge thanks to the original designer for creating the modular GoPro-style storage box system.

Safety Note

This is a user-designed and 3D-printed bicycle accessory.

Check the mount regularly, especially when riding on rough gravel roads.

If you notice cracks, excessive movement, deformation or damage, replace the printed part before continuing to use it.

Use at your own risk.

Tags

twittergravelv3

twitterbike

seatpostmount

aeroseatpost

toolbox

bikestorage

gravelbike

bikeparts

cycling

aerobox

gopromount

biketoolbox

seatpost

gravel

bicycleparts

Tagi