Testors Paint Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small tray to hold Testor's paints and brushes in while working with some mixing pots built in.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this to use with Testors paints after not being able to find one from Testors. Had a larger version years ago that had mixing pots, bottle storage, etc. as well as spots for brushes and glue and knives when working with models. I did not need the glue and knife spots as I am not using it for models so left them out.
Tray will hold 8 bottles for storage, 4 bottles being used, and a middle slot for a bottle of Testors thinner. There are 4 mixing pots, 4 holes for holding brushes vertically, and a tray for brushes or whatever.
Printed out of PLA (PLA+ technically but should not matter)
.2 mm layers
2 walls
15% infill
.3mf file is from Bambu Studio on an A1
Sorry for the messy tray in the picture. Have been using this for awhile