1 / 1
1mm gasket for 10 x 3ml vial box with magnetic lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1mm-thick spacer / gasket that fits on the lid of the 10 x 3ml box from the original model.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1mm-thick spacer / gasket that fits on the lid of the 10 x 3ml box . I created it because the magnets I have are just slightly too tall for the original model and there is a small gap between the lid and the box with them pressed fully in, and I didn't want to deal with pulling them out + reprinting with a deeper slot. Printed gasket out of TPU.