Eufy Robovac 11c/s wheel gear train
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement Eufy Robovac 11c/s gear train for the wheel.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 49
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
I have an Eufy Robovac 11c and suffered an issue where the Robovac would just spin in circles.
After searching YouTube, I discovered that this is a common issue with this Robovac model and is caused by the cog in the gear train wearing out.
This is a picture of the teeth worn out (right) on the cog, along with the part I have printed (left):
This is a picture of the original part:
The recommendation is to print in PETG. If the centre hole is a little too tight, just drill a hole through it with a larger drill bit.
Original link to a YouTube video on how to disassemble your Robovac, replace the broken part, and reassemble: