Bonkers Benchy Core One+ (Gen2) compatible (7.8minutes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bonkers Benchy fixed to work with Gen2-firmware
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
After doing some bug hunting and finding out that there is an edge case where the Gen2 firmware handles M107 -gcode weirdly and thus the original Bonkers Benchy doesnt work; here is an reslice that works.
Done with the original Bonkers benchy settings, with the M107 removed. I also slowed down the smoke stack so it prints nicely, didnt make the total time higher than 8min so I think thats an improvement ;)
The M107 issue has been reported to Prusa, and they probably will fix the gcode in the test prints archive, but if someone else wants to push their new Gen2 upgrade to the limit, before they get this through their pipeline; here you go :)