1 / 7
Sovol SH01 PTFE hose connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE hose connector for the Sovol SH01 filament dryer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn’t like the fact that I couldn’t secure the PTFE tubing on my Sovol Filament Dryer SH01. So I replaced the standard outlets with my own. The existing acrylic M6 nuts can be reused.
PTFE hose connector and nut:
Filament: PETG
Layer: 0.1 mm
Infill: 100%
End caps:
Filament: TPU 95A
Layer: 0.2 mm
Infill: 100%
2026-08-28: Added a M6 nut.