H0 Scale Model Railway Chimneys (1:87) – Various Roof Pitches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detailed H0 scale (1:87) chimneys for model railways. Includes 0°, 30°, 35°, 45° roof pitches with and without trim.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch
enthält eine Auswahl an detailgetreuen Schornsteinen im klassischen Maßstab H0 (1:87), die speziell für verschiedene Dachschrägen designt wurden.
Jede Variante ist sowohl mit als auch ohne realistischen Dachanschluss-Rand im Set enthalten, sodass du sie flexibel an deinen Gebäuden anbringen kannst.
Enthaltene Varianten & Neigungswinkel
0° (Flachdach ) – mit & ohne Rand
30° Dachneigung – mit & ohne Rand
35° Dachneigung – mit & ohne Rand
45° Dachneigung – mit & ohne Rand
Druck-Tipps & Empfehlungen
Druckertyp:
Resin-Drucker (SLA/MSLA): Empfohlen, um feinste Details und eine glatte Oberfläche zu erzielen.
FDM-Drucker: Ebenfalls gut machbar (nutze hier am besten eine feine Düse von 0,2 mm oder 0,4 mm und eine geringe Schichthöhe von 0,1 mm – 0,12 mm).
Infill: 15 % (oder mehr, je nach gewünschter Stabilität) reichen völlig aus.
Supports / Stützstrukturen: Je nach Ausrichtung auf dem Druckbett können minimale Stützen an der Unterseite hilfreich sein. Bei Resin-Druck empfiehlt sich oft eine leichte Anstellung von ca. 30–45 Grad mit leichten Supports an der nicht sichtbaren Unterseite.
Material-Tipp: Für FDM eignet sich graues PLA sehr gut, da es direkt die passende Grundfarbe hat. Bei Resin sorgt eine anschließende Bemalung (z. B. mit Acrylfarben) für einen extrem realistischen Ziegel- oder Putz-Look.
Englisch
a versatile selection of detailed chimneys in the classic H0 scale (1:87), specially designed to fit different roof slopes.
Each variant is included both with and without a realistic flashing/base trim, allowing you to adapt them flexibly to your buildings.
Included Variants & Roof Angles
0° (Flat roof) – with & without trim
30° Roof pitch – with & without trim
35° Roof pitch – with & without trim
45° Roof pitch – with & without trim
Printing Tips & Recommendations
Printer Type:
Resin Printer (SLA/MSLA): Recommended for achieving the finest details and a smooth surface.
FDM Printer: Also works well (best used with a fine nozzle of 0.2 mm or 0.4 mm and a low layer height of 0.1 mm – 0.12 mm).
Infill: 15% (or higher, depending on desired stability) is completely sufficient.
Supports: Depending on the orientation on the build plate, minimal supports on the underside may be helpful. For resin printing, tilting the model slightly by about 30–45 degrees with light supports on the hidden underside is recommended.