1 / 5
Retro Charging Dock for iPhone 16 Pro and Apple Watch — zdjęcie 1
1 / 5

Retro Charging Dock for iPhone 16 Pro and Apple Watch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn your iPhone 16 Pro into a retro-style bedside clock while charging both your phone and Apple Watch in one compact d

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The phone is positioned horizontally, making it ideal for iOS StandBy mode, while the Apple Watch charging area is located on top.

Modular phone insert

The part that holds the phone is a separate, magnetically attached insert. This makes the design modular and easy to adapt for different phone cases.

If your case has different dimensions, only the magnetic insert needs to be modified and reprinted rather than the entire dock. Different case-specific inserts can also be swapped in and out easily.

If you do not need to change or replace the insert, it can simply be glued permanently into place instead.

(For modification, see: Case Ring.STEP)

Compatibility

  • iPhone 16 Pro

  • Apple Watch charging cable

  • Designed for landscape StandBy mode

  • The included insert is designed for the case shown in the photos

Additional hardware required

In addition to the printed parts, you will need:

  • 18 magnets, 5 × 1 mm

  • 18 magnets, 3 × 6 mm

  • Apple Watch charger

  • MagSafe charger for the iPhone

  • A small amount of glue for securing the magnets

Assembly note

Check the polarity of every magnet before gluing it into place. Install the magnets in matching pairs and test the connection between the parts before the glue sets.

The model shown was printed in black and yellow for a retro Fallout-inspired look, but the parts can be printed in any color combination.

**The original concept is not mine, but this model was designed from scratch by me. If you are the creator of the original concept, please DM me so I can give you proper credit.

Tagi