Sovol SV08 Hula Foot for AxialBallBearing 51101 (41mm height)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake of Nico Steinbachs model for SV08. Extended height for thicker mcu fans under coverplate.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: This design is only for 51101 axial ball bearing!! Not for F8-22M!!
Increased height to total 41mm. So the external fan fits better under the MCU-plate and gets better air ventilation. Thanks to @steinbachnic_1433725 for this great model.
So the main foot was 20.6mm, I cut and adapted to 41mm height.
Also reinforced springs of Hula-TPU-Spring a bit for more stability and printability.
Printed in PLA, PETG would be better, but PLA was in best reach.
Distance Disk and TPU-Stand were printed in 90Sh(A) TPU.
Three stl-files
Hula-Key
Hula-DistanceDisc
Hula-TPU-Stand
are originals from Nico.
Here Nico's assembly sketch.


Explore my other Printables: https://www.printables.com/de/@Tritschi