INDX extended wiper bin shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shield to keep heat in the chamber and poops in the bin.
- Ocena
- 4,75 / 5
- Polubienia
- 35
- Pobrania
- 112
- Wydruki
- 8
- Wyświetlenia
- 783
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
I created extremely simple draught shield for all those who already printed their extended bin (Revision 3). You can use this shield with stock extended bin without any modifications, but it has to be in specific position to do its job. For that, print also my bin holder:
If you printed my bin holder before 26.8.2026 already, please reprint also that one, I tuned it a little to work better together with this shield.
Hint:
if your shield does not align with the printer well, make sure it is pushed on the bin all the way. The shield is designed to fit very securely on the bin, which is why the slot is tight. When installed correctly, it should line up with bin pattern like this. There should be like one single layer visible.
