1 / 3
DS3225MG Servo 25Kg Mount and Housing — zdjęcie 1
1 / 3

DS3225MG Servo 25Kg Mount and Housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

STL and STEP files. Use as-is, or Remix.

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mount and housing for DS3225MG servo. Control wires come out the bottom opening.

Some supports are needed, and you’ll need to tell your slicer to pause at the top of the embedded M3 nuts so you can insert them. (See photo)

I hope you enjoy the model! Comments📝, likes❤, ratings🤩 encouraged!

Tagi