Melbourne Ska Orchestra 3d "John Wayne" style logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Melbourne Ska Orchestra 3d "John Wayne" style logo. Layer/colour changes built in.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Melbourne Ska Orchestra 3d "John Wayne" style logo.
My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks.
Layer changes built in.
Suggested layer colours are:
Layer 1 - white
Layer 2 - red
Layer 3 - black
Layer 4 - yellow/gold
NOTE: That the corner pins shown in the 3d preview are NOT printed. They are masked off using negative space and only used during the building process to locate layers accurately.
NOTE 2: The image with 4 prints in it shows the difference between printing the top layer in Gold vs Yellow. Also, the cowboy figure is Galaxy Black in one printed and Matt Black in the other.