1 / 1
Pontiac Fiero Parking Brake Cable Firewall Boot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the title says, a replacement for a boot that GM no longer makes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Printed in TPU 95a filament. I used 20% infill, you will need supports enabled for the outer lip of the part.
It is a 2 piece design, slip the split inner bushing over the cable, apply a liberal amount of PVC primer to at least one side, and install into the outer bushing. Let dry for a couple of hours before installing into the firewall hole. It is a tight fit and will take some considerable effort.