1 / 1
Pressure relief valve lever for Corny Keg
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lever to open the pressure relief valve on a Corny (Cornelius) Keg
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU Lesser General Public License
I got an older Corny keg from someone with a purchase, and the pressure relief valve's lever was hanging on by a thread. Fortunately, it was still there so I could get the dimensions. Printed a new one, and the keg is back in action (for pretty much free).
Printed on its side with supports. I used a .25mm nozzle (because it was already installed and I didn't feel like changing it for such a small object), but you should be fine with 0.4 as well.
Printed in ABS with 40% infill (3D honeycomb) and 0.15mm layers.