Adafruit BTTF Time Circuit Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spent ages trying to work this design out, 2 days latter it was done, bits fit nicely although tight squeeze but it…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Spent ages trying to work this design out, 2 days latter it was done, bits fit nicely although tight squeeze but it fits, extra height incase an arduino is used, i brought all the bits from Adafruit, but can i work out the building of of it. Nope, gives 2 pins on the sketch and one pic i wanted to see, there's tape in the way, so if any one builds this could they please post something on comments, people say its easy, i do lots of arduino stuff without a problem, just cant seem to follow the tutorials on this. the hole on the side is for optional added 5v input. the led holes are for 3mm leds. but here's a box for it anyway
this thing is from.... https://blog.adafruit.com/2012/07/02/great-scott-delorean-inspired-time-circuit-clock-with-adafruit-gear/
Found a Instuctable on this project, the circuit is there as maybe a better box than what I did
https://www.instructables.com/id/3D-Printed-Back-to-the-Future-TIme-Circuit-Clock/
at least this one makes sense
Category: Electronics