1 / 3
HeliosPro DAC internal mounting plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket to install the HeliosPRO DAC inside a laser projector behind the internal mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Space was very tight inside my 8W OPT laser so I made this bracket to install the DAC controller PCB behind the display board.
It requires a couple of M3 nuts and bolts to secure the controller to the bracket, and another couple of nuts and washers to fix to the screws on the back of the laser housing.
It's a tight fit but works well and all the cables can be easily routed.