Halterung Prusa Buddy3D Camera an Prusa MK3 und ähnliche Modelle/ Prusa Buddy3D Camera Mount for the Prusa MK3 and Similar Models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Die Kamera bewegt sich in Z-Richtung mit/ The camera moves in the Z-direction at a speed of
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Diese Halterung ermöglicht es, die Buddy3D‑Kamera kopfüber direkt am Motor der X‑Achse zu befestigen. Durch diese Position zeigt die Kamera immer exakt auf den Düsenbereich, da sie sich gemeinsam mit der Z‑Bewegung des Druckkopfs nach oben und unten mitbewegt. Die Ansicht bleibt stabil und zuverlässig, ideal zur Überwachung des Druckprozesses.
Das Kamerabild wird anschließend einfach um 180° gedreht, sodass die kopfüber Montage korrekt dargestellt wird.
Für die Befestigung der Kamera am Halter stehen zwei Optionen zur Verfügung:
2× Senkkopfschrauben M3 × 8 + Einschmelzgewinde M3,
oder
2× längere M3‑Schrauben mit Unterlegscheiben und Muttern
Dazu die Montageplatte der Kamera entfernen und verschrauben.
Halterungs-Befestigung am Motor
Die Halterung wird mit 1× Innensechskantschraube M3 × 18–20 mm und 1 x Unterlegscheibe am Motorblock der X‑Achse fixiert.
Support wird benötigt (siehe Screenshot)
Translation: DeepL
This mount allows you to attach the Buddy3D camera upside down directly to the X-axis motor. In this position, the camera always points precisely at the nozzle area, as it moves up and down in tandem with the Z-axis movement of the print head. The view remains stable and reliable, making it ideal for monitoring the printing process.
The camera image is then simply rotated 180° so that the upside-down mounting is displayed correctly.
There are two options for attaching the camera to the mount:
2× M3 × 8 countersunk screws + M3 melt-in threads,
or
2× longer M3 screws with washers and nuts
To do this, remove the camera’s mounting plate and secure it with screws.
Mounting the Bracket to the Motor
The bracket is secured to the X-axis motor block with 1× M3 × 18–20 mm hex socket screw and 1× washer.
A support is required (see screenshot)