Chemex Filter Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative storage container/box for Chemex filters
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something simple that would basically hide the box on my shelf and blend in with the rest of my coffee areas decor but keep them away from dust and dry, so I designed this storage container/box for storing Chemex branded filters
Will fit up to a 100 filters (maybe more) by themselves or if you don't want the filters touching the plastic directly, you can slide the entire box inside the container.
- I used PLA for the box structure and PLA PRO for the letters, you may have to play with the tolerances if doing with a different material as I have not tested
- I also just used the basic print settings in Elegoo slicer so shouldn't have to modify anything
- Designed to print with no supports, just make sure openings are facing up
- You can remove the letters in the slicer if you want to reduce the print time on the lid or just print the bottom base and use that by itself if you want the lid to save even more filament.