Telescopic print in place modular frame holder v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Telescopic print in place modular frame holder for standard Langstroth beehive frames. Clips on to the side of the hive.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a printable removable and modular frame holder. Clips onto the side of the hive to hold frame during inspection.
The problem with other frame holders that do not have the spacer is that they can move and your frames can fall on the ground.
There are three parts. One telescopic spacer and two endcaps. The endcaps press fit in at the ends of the telescopic spacer. It is modular, thus meaning if one part breaks, it can be reprinted and refitted.
The telescopic part that is print in place. This part carries no load and is only to help keep the endcaps at the correct spacing for a langstroth frame. It can also be collapsed for easy storage. The part features a bead and lip stopper to stop overextending. Note, the clearance between cylinders is 0.5mm.
Each of the endcaps have a flat bottom for easy printing. They also feature fillets to stop any stress concentrations from forming and breaking the part as they do the heavy lifting.
The endcaps can hold 3 frames at a time.
Best printed in something like PETG to ensure the UV from the sun does not make the parts brittle.
Version 2 reduces the tolerances on the telescopic spacer to 0.3 mm