Mount Everest & Base Camp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D model of Mount Everest, at 1:250'000.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Haptic Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D model of Mount Everest, at 1:250'000.
It measures 6.0 × 4.0 × 1.9 cm and covers real terrain between 4853 and 8848 m above sea level — heights are at true scale, with no vertical exaggeration.
WHAT'S IN IT
- Terrain from Copernicus GLO-30: 30 m source data on a 50 m model grid
- Place name and scale engraved into the underside
PRINTING
- The model is one closed, watertight body — 126,398 triangles
- No supports needed: terrain has no overhangs
- 0.1–0.2 mm layers. Adaptive layer height suits relief well — fine on the ridges, coarse on the flats
- Base is 4 mm thick under the lowest point
- A separate drop-in frame is included: 6.6 × 4.6 cm, 6 mm tall. The model drops in from above and rests on an inner ledge — print it in a second colour
DATA
Built from open geodata:
- Copernicus GLO-30 (terrain)
This data is free to use, including commercially, and derived works may be shared — provided the source is credited:
© Data: Copernicus DEM — produced using Copernicus WorldDEM-30 © DLR e.V. 2010–2014 and © Airbus Defence and Space GmbH 2014–2018, provided under COPERNICUS by the European Union and ESA · Place names © OpenStreetMap contributors (ODbL)
Made with Manifold, which turns open geodata into printable models.